| Picture |
Heading |
Updated |
 |
Center distance digital calipers
Model Number: 121
Key Specifications/Special Features:
To measure the center distance between two holes whose center distance is above 5mmManual power on/offZero setting at any positionMetric/Inch system conversion at any positionWith data out... |
2017-11-20 |
 |
Splash-proof Digital Calipers
Model Number: 131-320A
Key Specifications/Special Features:
It can work after cleaning the splashed water on it.The degree of protection is lP54.With on/off button and data output interface.Zero setting at any position.Metric/inch system conve... |
2017-11-16 |
 |
0-10mm Extra Large Dial Indicators
Model Number: 512-083
Key Specifications/Special Features:
Round mechanical body.Adjustable steel dial ring.Anti-dirty screw rises while lifting measuring spindle. With adjustable tolerance markers.With dial locking screw.DiaI diameter isΦ80mm... |
2017-10-27 |
 |
Mono-block vernier height gauges
Model Number: 312
Key Specifications/Special Features:
Mono-block vernier.Carbide tipped scriber.With fine adjustment.Made of stainless steel or carbon steel.
Shipping Information:
FOB Port:
Shanghai
Lead Time:
... |
2017-10-25 |
 |
Big LCD Digital Calipers
Model Number: 114
Key Specifications/Special Features:
FeaturesBig LCD for easy reading.Knife-edge measuring faces for internal measurement.With data presetting function.Absolute measurement and comparison measurement conversion at any positio... |
2017-10-17 |
 |
Stainless Steel Hardened Contact Points Dial Bore Gauges
Model Number: 570
Key Specifications/Special Features:
For small holes diameter measurements.Stainless steel hardened contact points.Wide measuring ranges with inter changeable measuring heads.Ring gauges can be supplied per request.Accessorie... |
2017-10-17 |
 |
Digital Lux meter for enviroment
Model Number: K1010B
Key Specifications/Special Features:
DescriptionDigital Lux meterMeasuring range:1LUX-50.000LUXResolution:1LUXAccuracy:±4%±10dgts(<10000LUX) ±5%±10dgts(>10000LUX)Repeatibility:±2%Sampling Frequency :2times per secondop... |
2017-10-16 |
 |
Indicating Micrometers
Model Number: 406-106r
Key Specifications/Special Features:
Retractable anvil with indicator for three-wire measurements of pitch diameter of precision screws roundness and parallelism measurement.Mainly for comparative measurement.Carbide tip... |
2017-10-11 |
Friends links